Dyson® Vacuum Accessory Holders
Dyson® is generous with its accessories but stingy with its holders: here are two versions of a "3d print it yourself" accessory holder which works with v11 attachments.
Version 1 - EASY - has two straight mounting holes and is perfect for attaching to drywalls/plasterboard.
Version 2 - TRICKY - has one straight an one angled mounting holed, which works well for mounting on timber (e.g., inside cupboards); it's a bit nicer and sleeker looking as it doesn't show the latching hole.
Print them out of a reasonably strong material (e.g., PLA+ or better) and try to match either the vacuum's silver, it's blue (or purple) accent color, or the color of the cupboard.
3D PRINTING NOTES
- 3d printing experience recommended.
- This part is for printing with FDM/FFF 3d printers. Resin printing is not recommended as the resins generally become more brittle over time.
- For 0.4mm nozzle printers we recommend 3x outlines, top and bottom surfaces, with 30% infill.
- Needs support to form the holes properly.
LEGAL
You are licensing a 3d part file which you can use to print parts for personal, non-commercial use. You cannot sell the parts you have printed, you cannot on-sell the 3d STL file, you cannot copy or modify the design, or share the file (free or otherwise).
Dyson® is the trademark or registered trademark of its owner and no relationship exists or is implied between Dyson and Department9.
You'll get a downloadable 3d STL file you can print as often as you want